Designed to produce low dissolved solids water from tap or well water, these wall-mount RO systems use high efficiency reverse osmosis membranes. The RO product water is used in applications such as carwash spot free rinse, water stores, whole house, labs, ice makers, humidification, misting and a wide variety of other applications.
RO System Model No. |
RO System Capacity |
RO Membrane Elements |
Line Sizes |
RO System Dimensions |
Approx. Shipping Weight |
||||||
GPD |
m³/day |
Qty. |
Size |
Inlet |
Perm. |
Conc. |
Length |
Depth |
Height |
||
WM-12521A-116 |
250 |
0.9 |
1 |
2.5 × 21 |
½ |
⅜ |
¼ |
27/69 |
11/28 |
27/69 |
90/41 |
WM-22521A-116 |
500 |
1.9 |
2 |
2.5 × 21 |
½ |
⅜ |
¼ |
27/69 |
11/28 |
27/69 |
96/44 |
WM-32521A-116 |
750 |
2.6 |
3 |
2.5 × 21 |
½ |
⅜ |
¼ |
34/86 |
11/28 |
27/69 |
106/48 |
WM-42521A-116 |
1,000 |
3.8 |
4 |
2.5 × 21 |
½ |
⅜ |
¼ |
34/86 |
11/28 |
27/69 |
118/54 |
WM-225A-116 |
1,200 |
4.5 |
2 |
2.5 × 40 |
½ |
½ |
¼ |
27/69 |
11/28 |
46/117 |
116/53 |
WM-325A-116 |
1,700 |
6.4 |
3 |
2.5 × 40 |
½ |
½ |
¼ |
34/86 |
11/28 |
46/117 |
136/62 |
WM-425A-116 |
2,200 |
8.3 |
4 |
2.5 × 40 |
½ |
½ |
¼ |
34/86 |
11/28 |
46/117 |
152/69 |
WM-24A-116 |
4,000 |
15.1 |
2 |
4.0 × 40 |
½ |
½ |
½ |
34/86 |
12/30 |
52/132 |
175/79 |
Voltage: Above models indicate recommended voltage codes per model. Available voltages:
AMI’s WM Series Wall Mount RO Systems are available with a wide variety of optional add-on accessories. All assemblies include hardware and mounting equipment for easy upgrade to your new or existing system installation.
Includes mounting bracket and Isolation Valves to close the line when changing the filter cartridge.
Part # A711
Filter cartridge must be ordered separately – common options are shown below. Any 20″ Big Blue size cartridge can be installed. Click here to view our complete filter cartridge product selection.
Post-treatment Options Available:
AMI Media filters feature fully automatic backwash or regeneration for easy, trouble free maintenance. Ensure superior system operation and extended membrane life by providing proper pretreatment to the incoming feed water on a continuous basis. Common pretreatment or post-treatment methods include:
Click Here to visit the Media Filtration section of our site for detailed information on the full line of media filtration products we carry.
Screw the mounting bracket to the wall first to simplify the mounting of the RO unit. Includes powder coated mounting plate with screws.
Pre-packaged wall-mountable water quality monitoring controls allow you to monitor the quality of the incoming feed or RO product water. Assembly includes the monitor, enclosure and sensor.
Use this free-standing carbon steel powder coated frame to convert the WM unit to a floor unit.
Part # A626
Optional: Floor Stand Casters Kit
2 Locking & 2 Swivel for ease of mobility.
Part # A625
Add an ultraviolet water sterilizer for a 99.9% reduction of bacteria and viruses in the feed and/or permeate line.
Note: For feed line, wall-mount filter cartridge assembly shown above is required.
To automatically turn the RO system on or off with the permeate storage tank level. For use with a pressurized storage tank (sold separately).
Pressurized permeate storage tank available in 40 or 80 gallon volume. Assembly includes tank, valve, piping, tubing, and pressure gauge.
Turns system on or off according to the water level in an atmospheric storage tank.
Atmospheric storage tank and repressurization pump are sold separately.
To allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.
Monitor system flows. Includes mounting bracket and fittings for connection of system tubing.
To allow for monitoring of the in and out pressure of the prefilter in order to indicate when the cartridge needs to be changed. Assembly includes pressure gauge and fittings.
Give us a call today at 604-878-8092. Let’s discuss your unique application needs.